GENERAL / COST CONTROL
TITAN MIX P75
Positioned for white masterbatch, PVC profiles and general plastics where a cost-controlled direction is required.
View P75White masterbatch production
Titanium Dioxide for Masterbatch
Titanium dioxide for masterbatch is selected by carrier resin, pigment loading, dilution ratio, dispersion, process temperature and downstream use. A TiO2 masterbatch grade should be evaluated in both concentrate production and the final plastic application, because easy processing in one stage does not guarantee the required opacity or color in the finished part.
Information That Changes the Recommendation
Share carrier resin, target TiO2 loading, dilution ratio, extrusion temperature, pelletizing and filtration setup, downstream polymer, opacity and undertone targets.
Before Final Approval
Check torque, pressure, screen residue, dispersion, pellet quality and final-part color at the intended dilution. Customer formulation and production-line testing are required before final grade approval.
Matched to published positioning
White Masterbatch Product Paths
HIGH WHITENESS
TITAN MIX P80
Positioned for high-whiteness white masterbatch, engineering plastics and thin-film applications.
View P80TITAN MASTERBATCH GRADE
TITAN CR-210T
Published as a chloride-process masterbatch grade with exact technical parameters available on its product page.
View CR-210TPOLYOLEFIN COLOR MASTERBATCH
CITIC CR-210
The product record positions this grade for polyolefin color masterbatch and describes dispersion, fluidity and processing performance.
View CR-210Masterbatch Evaluation Checklist
| Decision point | What to record | Why it matters |
|---|---|---|
| Carrier and end polymer | PE, PP or other carrier; final polymer and application | Compatibility and downstream performance depend on both stages. |
| Concentrate design | Target TiO2 loading, additives and dilution ratio | These affect processability, dispersion and final opacity. |
| Processing | Temperature profile, screw design, filtration and pelletizing | Use the actual line conditions when comparing candidates. |
| Acceptance | Pressure, residue, pellet quality, color and final-part opacity | Approve the grade from measured trial results, not the application label alone. |
Read the plastics and masterbatch selection guide or prepare a controlled sample trial.
Frequently Asked Questions
How do I choose titanium dioxide for white masterbatch?
Define carrier resin, loading, dilution ratio, process temperature, filtration, downstream polymer and final opacity or undertone. Then compare candidate behavior in concentrate production and the finished plastic.
Which TITAN products are positioned for masterbatch?
TITAN MIX P75 and P80 provide general and higher-whiteness starting paths. TITAN CR-210T is published as a chloride-process masterbatch grade.
Which CITIC grade is documented for polyolefin color masterbatch?
CITIC CR-210 is positioned for polyolefin color masterbatch. Its product page contains the published application statement and available exact-grade technical data.
What should I send with a masterbatch inquiry?
Send carrier resin, target loading, dilution ratio, processing conditions, final polymer and use, current grade, trial quantity, destination and required documents.